Monday, 13 August 2012

Radiator Fitted

This is one of the simpler jobs. The hardest part is cutting parts off the brand new out of the box rad. As you can see from the image below, the bottom brackets need to be trimmed, and the plastic side supports cut off.

Once done, the rad is fitted to the front of the chassis with some home made brackets and M8 bobbins (bought from Ebay). The brackets still need to be trimmed once I fit the body depending how far back/forward the rad needs to sit.

 This next picture shows the front fitting:
It all gets removed before the engine is installed to prevent it getting damaged.

No comments:

Post a Comment